Want to promote your services?Join as a Pro

Categories

5 easy steps of vinyl flooring installation

living-room-2732939_1920 (1)

There are many benefits you new vinyl flooring can bring you. This material has for a reason been popular for several decades already.

If compared with other coverings, vinyl has such competitive advantages as, for example, low cost and water resistance.

Furthermore, it can create a completely new appearance of your home. Today you can buy various colors of vinyl flooring. It also reminds many natural materials, it may look like stones.

Additionally, this type of covering is simple to take care of. It allows sweeping floor easily and maintaining the room clean.

Installation of vinyl flooring won’t take much of your money. It’s cheap enough while rather durable.

In word, it’s a good home improvement idea to install vinyl flooring in your home. If you already decided to do it, HireRush.com offers you to read step-by-step guide.

How to install vinyl flooring in your home

  1. Prepare the floor

    Before getting started your vinyl flooring installation, you must prepare the surface of the room. First, remove all appliances, pieces of furniture and other things that can be an obstacle. If this is a bathroom, remove all fitments like toilet or sink if needed.
    Make sure that the subfloor is absolutely clean and dry. It should also be even in order to make flooring smooth and avoid irregularity. Only clean flat surface guarantee you a decent result.If you found holes in your old floor, fill them with a filler. But then, let it dry.

    It may be necessary to cut the door frames to fit the covering. To trim a door, use a handsaw. Check if there is enough space for a new underlayment.

    Tip1:  Roll up your vinyl and lay it in the room, where you’re going to install flooring for 24-48 hours before starting. It will help the material to adjust to the room temperature.

    Tip2: Vinyl can be installed on the concrete and over the old linoleum or vinyl. Though, you need a dry clean surface with no cracks as well.

    But be cautious, if the previous flooring is in bad condition, avoid doing that or consult our specialists.

  2. Cut vinyl layouts

    Now, when the surface is ready, you can cut a vinyl flooring sheet. There are two methods to do it.

    If the room has many angles make a template. Use heavy paper. Then, according to your templates size, cut vinyl.

    The second way is good for small rooms, where you can easily measure the area. Cut more vinyl, so that you could better remove superfluous piece.

    Ensure vinyl fits exactly your template.

    Tip1: Buy smaller pieces of vinyl for flooring small rooms to avoid cutting.

    Tip2: For perfect-looking floor installation you may use plywood underlayment. After day or two of acclimatizing, cut plywood sheets and tape them together before stapling.

  3. Put vinyl flooring

    Once the vinyl is being cut, it’s time to lay it down. Transfer it to the proper place and position it.

    Then, cut the vinyl excesses from the top to the ground.  You also need to fit your corners, so thoroughly cut the rest in a triangle shape.

    It may be necessary to seam your floor, but everything depends on the kind and brand of vinyl.

    Tip1: Leave a bit free space to the wall, as vinyl expands.

    Tip2: Don’t throw up the rests; they may be useful in future.

  4. Fix vinyl sheets

    On this phase you must know for certain that vinyl matches precisely. Press into angles near walls; make sure the surface is smooth.  If no, make all necessary cuts using straightedge.

  5. Stick vinyl covering down

    After all previous steps are done, check the fit. If everything is ok, you can apply the adhesive material.

    To install flooring, fold half of sheet and spray the adhesive. It’s important to spray evenly, in the direction from center of the room to the walls.

    Next, press down the flooring (an ordinary roller pin may be used). Repeat the same with another half.

    When you finished completely, try to minimize foot traffic into the room. Besides, don’t wash vinyl with water.

    Give it at least one day. Then, you can fix the furniture and appliances back to its place.

    Tip1: Always follow the manufactorer’s instructions when gluing.

    Tip2: Be ready to clean the adhesive instantly, because when it dry, it’s hard to remove.

The job is done. Still, some problems can occur. To make vinyl flooring perfect, consider hiring a proper professional.Leave your request here

Leave a Comment

Your email address will not be published. Required fields are marked *