Creating your own home set of security cameras is a great way to increase your safety and comfort level. It could be useful for various reasons.
First and foremost, the video you get could be helpful for detecting a criminal in your private property. Besides, you will be able to control the situation, viewing a broadcast in real time.
Or you can just prevent your children from home hazards. You will able to monitor those areas of the house you think most need surveillance.
Earlier, it was only a privilege of the wealthiest people. But today installing security cameras won’t be so expensive.
The process may require some knowledge. Yet, it is a rather simple do-it-yourself project that can be accomplished by you, especially considering modern security camera sets.
With a few basic tools you can install the surveillance system yourself. Read the instructions that can help you to get the work done.
Save some dollars by following the tips below. Otherwise, contact a pro. Sometimes, people find installation process difficult.
The job really involves some special skills and experience. So alternatively you can find a specialist and rely on him.
Home surveillance system installation guide
Pin down the location
On the initial phase of the installation, you need some things concerning the process to be checked and defined. Make sure you’ve done all the following preparation steps to start off.
First important thing you have to make decision on is the location of your cameras. Whether inside or outside the house, think of the places, where it would be reasonable to attach them.
According to experts, it’s better to install your cameras on the crossing of the roof and outwall. This place is high enough to see all hazards and at the same time, the devices won’t be so noticeable.
In addition to it, the roof will protect your surveillance system against bad weather conditions. Rains, snow and other deterrents may harm even waterproof cameras as well.
As to the cameras that you want to fix inside your house, choose the best place to increase visibility. The common location of indoor cameras are the corners.
Remember to check if there are no hindrances. Choose the most vulnerable zones of the house, as it makes no sense to overpay for total area surveillance.
It’s important to establish the cameras rationally. The typical areas needed your monitoring include drive ways and stairways, halls, doors etcetera.
Get all necessary equipment
To ensure high level of safety in your house, buying the right cameras and accessories means a lot. So this step is with no doubts crucial one.
When purchasing security cameras, you have two ways. Both are acceptable and could take place in your particular situation.
The first way is about buying a whole set of cameras at once. It would be cheaper and more convenient, if you get the assembled surveillance system package.
Another way is to buy the separate cameras. They vary in their price, so select the one that meets your needs the best. Meanwhile, it would be a bit more difficult to install them.Referring to the type of cameras, you should be guided by the space, purpose and your home peculiar properties. For example, indoor cameras may be helpful to keep tabs on children.
The space you want to cover is also the factor. Opt for wireless cameras, if the area is not so big. Normally, 2-3cameras will suffice for an average house.
Additionally, buy a digital video recorder (DVR), wiring and power cables.
Install the DVR
The main function of this device is to maintain the video material, which is being captured and broadcast it on the monitor. Thus, you will always be able to check the footage you need.
Install your DVR and the monitor. Use either computer or special small TV monitor. Then, check the operation of all the appliances before fixing it.
Install the cameras
As you already chose the place that provides cameras with wide view angle, set them into the wall. Install your cameras high enough, so that they couldn’t be damaged.
The safest way to fix cameras is to screw them. For this purpose, drill holes for screws and mount your camera.
Attach it to the socket. After that, connect the camera to the DVR. You need to simply find the ports and attach both to them and power sources.
What’s about the wireless cameras, you need to install the disc coming with it in the package. Otherwise, connect the camera with a USB-cable
Some cameras provide the ability to observe from remote spots. So check it and connect the camera to the Internet.
Finally, you have to connect monitor with a DVR. Mind to attach into the right input. Check if everything works properly and you see the image.
One more essential part for normal operation of your surveillance system is to make sure that all cables are secured.
Band the surveillance system
Define the place (usually a separate room) to store all the cables, DVR and the monitor. It should primarily be convenient for wiring.
Connect all the cameras with Siamese cables. Just make them through the house. Then, use a power box to power up your security camera system.
Attach the camera wires to the box. Next, attach the video cables to the DVR. This will give you the opportunity to see the records of each camera.
To end the process, make sure all the cables are put out of sight.
A home security camera can now be considered as a necessity for every household whenever safety is concerned. Hence, investing in it is a must. If you wish to know more about them before purchasing one, you can refer some comparison on Security Baron and other related websites that talk about a home security system.